Bogen V150 8 Input Power Vector Amp - 150W

The Bogen V150 Power Vector Amplifier 150W with 8 module bays for a wide array of inputs and outputs. Modules are available for signal processing and inputs such as: balanced and unbalanced inputs; stereo or mono; telephone systems/PBXs; transformer-isolated; microphones; tone generator; and bridging. The Power Vector automatically senses each module and inserts it into the signal path. A 5-position barrier strip allows for 4/8ohm or 25/70V output loads. When you need an amplifier with flexibility and reliability, the Power Vector V150 is the obvious choice. 8 module bays for inputs and outputs. Each input has a independant volume control. 4 levels of priority between modules. 125Hz Lo-cut filter for module 6. 11-segment LED output level meter monitors the output level of the power amplifier with peak and average meter switch. Grounded un-switched AC convenience receptacle with a 500W maximum capacity provided for external equipment. Remote volume control panel can operate motorized volume control (RVCP sold separately). Power Output 150W. Distortion <0.5%. Frequency Response Transformer: 45-20000Hz. Direct output: 20-20000Hz. Signal to Noise Ratio Fundamental: -94 dB. With Aux Module: -70 dB. With Mic Module: -60 dB. With Tel Module: -70 dB. Output Impedance Transformer-Coupled: 70V 25V 8 ohms (balanced or unbalanced). Direct Coupled: 4 ohms. Muting 4 Steps: -60 -21 -10 0dB. Output Connections Pre-EQ (RCA) x 1. Signal Processor (RCA) x 1. 2 module bays. Input Connections 8 module bays. Specialties 500W unswitched grounded outlet. Dimensions: 16.5 x 3.5 x 12.